Table of Contents
Advertisement
Stratasys J826 User Guide
27. Attach the side panel to the printer.
28. Lower the top of the printer by releasing the support rod.
29. Secure the printer top with the screws (see Figure 4-133 on page 4-92).
30. Open the Maintenance Counters screen, scroll down to the General Pumps
DOC-28000 Rev. I
First, fit the brackets on the bottom of the panel into slots in the printer
chassis (see Figure 4-135 on page 4-93). Then, push the panel into place
and secure it with the screws (see Figure 4-134 on page 4-93).
Figure 4-145 Releasing the support rod to lower the printer top
section, and click Reset for the relevant counter(s) (see Figure 4-132 on
page 4-91).
4 Operating and Maintaining the Printer
4-98
Advertisement
Table of Contents
