Stratasys J826 User Manual page 74

3d printing system
Hide thumbs Also See for J826:
Table of Contents

Advertisement

Stratasys J826 User Guide
To clean the roller waste collector:
1. Prepare—
2. From the Option menu, select Go to Head Inspection Position.
3. Put on the gloves.
4. Remove the right UV-lamp assembly:
DOC-28000 Rev. I
❒ M2.5 and M2 Hex (Allen) keys
❒ disposable cleaning gloves
❒ 90% isopropanol (IPA—isopropyl alcohol) or ethanol (ethyl alcohol)
❒ cleaning cloth
❒ cotton swabs (Q-tips or similar)
❒ mirror
❒ flashlight
a. Disconnect the UV power cable and the fan power cable.
Figure 4-51 Disconnecting the right UV assembly
b. Remove the screw that secures the right UV lamp, and then pull and lift
up the UV lamp.
4 Operating and Maintaining the Printer
4-44

Advertisement

Table of Contents
loading

Table of Contents