Stratasys J826 User Manual page 42

Stratasys J826 User Guide
depend on part size and structure, the model material used, ambient
temperature and the length of the stoppage.
If you cannot continue printing:
1. Cancel the job.
2. Remove the partially printed 3D print from the build tray.
3. Resend the job to the printer.
You can stop printing from either the printer interface or from GrabCAD
Print.
• After clicking the Stop button in GrabCAD Print, you can resume printing
from GrabCAD Print or from the printer interface.
• After stopping printing from the printer interface, you can resume printing
only from the printer interface.
• After clicking the Pause button in the printer interface, you can resume
printing only from the printer interface.
DOC-28000 Rev. I
In GrabCAD Print, in the Schedule screen (see above):
❒ Right-click on the job to display the pop-up menu, and select Cancel
job.
OR—
❒ Left-click on the job to display the Job Status details, and click the
Cancel icon .
❒ Click .
4 Operating and Maintaining the Printer
4-12