Stratasys J826 User Guide
6. Raise the entire printer top and move the materials cabinet to access the
7. Using the hex (Allen) key, remove the four (4) screws that secure the printer
8. Pull the panel out and then lift it to remove.
DOC-28000 Rev. I
right printer panel (as you face the printer).
Figure 4-134
Right printer panel
panel.
Note: Brackets on the bottom of the panel fit into slots in the printer chassis.
To remove the panel, lift it so that the brackets are free of the chassis.
Figure 4-135 Panel removed
4 Operating and Maintaining the Printer
4-93