Stratasys J826 User Manual page 109

Stratasys J826 User Guide
UV Sensor Connected to Printer
The following steps apply when using the Stratasys UV sensor box that you
connect to the printer. They do not apply when using a UV external radiation
measuring device.
1. To synchronize the wizard and the UV sensor, enter the CF number from
2. Click Next.
DOC-28000 Rev. I
the label on the back of the UV sensor box.
Figure 4-111 UV sensor synchronization
Figure 4-112 Label on the bottom of the UV sensor box
The build tray lowers.
4 Operating and Maintaining the Printer
4-79