Stratasys J826 User Guide
DOC-28000 Rev. I
The additional transparency test will show if the heads are now properly
aligned, and—if not—the wizard will allow you to "fine tune" the
alignment.
❒ For High Mix and High Speed modes, if the head alignment parameters
were updated, you should "fine tune" the print heads to ensure color
uniformity, especially along the part's X-walls. To do this, choose Run
Color Uniformity Wizard and click Next. The Head Alignment Wizard
Completed screen appears. When you click Done , the Color Uniformity
wizard opens.
❒ If the vertical lines for the print heads were not aligned at either extreme,
or if you do not want to run the color uniformity wizard, choose End this
wizard, then click Next.
4 Operating and Maintaining the Printer
4-54