Stratasys J826 User Manual page 152

Stratasys J826 User Guide
5. On the printer, in the following wizard screen, enter each of the corrections
6. Click Next.
7. Save the corrections.
8. In the Wizard Completed screen, click Done.
DOC-28000 Rev. I
values that appear in the utility in the ¼ Pixel column.
Figure 4-185 Enter Pixel Correction screen in wizard
Once the correction values are saved, a check mark appears near the
wizard in the Wizards menu, as shown below. This indicates that the wizard
is activated and the values are in use.
Figure 4-186 Color Uniformity wizard activated in the Wizards menu
4 Operating and Maintaining the Printer
4-122