Removing Paper Guide, Upper - Epson Stylus Photo R310 Service Manual

Stylus Photo R300/R310

2.3.14 Removing Paper Guide, Upper

External View
Paper Guide, Upper
Roller PF Assy. Transparency
Rib
Figure 2-36. Removing "Paper Guide, Upper"
DISASSEMBLY AND ASSEMBLY
Torsion Spring, 122.2
Paper Guide, Lower
Hooks
2
1
Hook
Rib
Dowels
Parts/Units which should be removed before removing "Paper Guide,
Upper"
Paper Support Assy./Housing, Upper/Housing, Middle/Main Board Unit/
ASF Assy./Holder, Shaft Assy.
Procedure for Removing
1. Move "Carriage Unit" to the home position.
2. Put a transparency between "Paper Guide, Upper" and "Roller PF Assy.".
3. Release "Torsion Spring, 122.2" (x3) from the hook (
Main", then pull it out to the front.
4. Release the hooks (
upward. Then, release the dowels (2 each) while slightly holding up "Paper
Guide, Upper".
5. Press down "Paper Guide, Lower" and pull out "Paper Guide, Upper" (x3) to
the front while stepping it aside the ribs (2 each) of "Frame, Main"
There are 2 types of "Driven Rollers" of "Paper Guide, Upper".
Install them as shown in the following figure.
Figure 2-37. Installing Position of "Paper Guide, Upper"
Disassembly
1 : 1 each) of "Frame,
2 : 2 each) which secure "Paper Guide, Upper" (x3) to
Driven Roller (Grey) Driven Roller (White)
Revision A
63