Available Diagnostics - Emerson ControlWave Instruction Manual

ControlWave I/O Expansion Rack Instruction Manual

5.4.1 Available Diagnostics

5-28
Figure 5-21. WINDIAG Main Diagnostics Menu
3. Select the module to be tested. Enter any prompted parameters
(slot #, etc.). WINDIAG performs the diagnostics and displays
pass/fail results.
After performing all diagnostic testing, exit WINDIAG and then
4.
exit the NetView if you don't have any other ControlWave units
to test.
When you close NetView, the system asks whether you want to
close OpenBSI. Select Yes.
Set switch SW1-8 on the CPU module to ON (open). The
5.
ControlWave should resume normal operation.
Using WINDIAG, you can test all ControlWave modules with the
exception of the PSSM. WINDIAG's Main Diagnostics Menu (see
Figure 5-21) provides the following diagnostic selections:
Option
CPU & Peripherals
Analog Output
High Speed Counter
Prom/Ram
Analog Input
Communications
Service & Troubleshooting
Tests
Checks the CPU module (except for RAM &
PROM).
Checks AOs on the Analog Output module.
Checks the Universal Digital Input (UDI) module.
Checks the CPU's RAM and PROM hardware.
Checks AIs on the Analog Input module.
Checks Communication ports. The loop-back
tests require the use of a loop-back plug.
Revised Aug-2015