Table 3-1. Available Functions – Auto Calibration I/O Module - Emerson NGA2000 Instruction Manual

Instruction Manual
748275-F
September 2003
• manually initiated calibration cycle
• manually initiated zero and span cycles
• remotely initiated calibration
All of these functions can be attained
through the previously described setup
ITEM
Output
Relay Output (7 Total)
Remote Input (6 Total)
Feature
*Fixed in-calibration alarm.
3-4 Auto Calibration
Analog, 0 to 5 V, 0/4 to 20 mA
Digital, RS-232
Alarm #1
Alarm #2
Alarm #3
Range #1 ID
Range #2 ID
Range #3 ID
Range #4 ID
Zero Valve Driver
Bypass Valve Driver
Range #1/Gas #1 Valve Driver
Range #2/Gas #2 Valve Driver
Range #3/Gas #3 Valve Driver
Range #4/Gas #4 Valve Driver
Range Change 1 & 2
Range Change 3 & 4
Calibration Correction Select
Zero Calibration
Span Calibration on Current Range
Span Calibration Cycle
Auto Calibration Timing Device
Auto Range Change Select
Table 3-1. Available Functions – Auto Calibration I/O Module
Model NGA2000 I/O Modules
screens accessible in the Expert Setup
sub-menus. See Figure 3-1.
The I/O Module is now fully functional.
FUNCTION
Rosemount Analytical Inc. A Division of Emerson Process Management
AVAILABLE
Yes
No
Yes*
No
No
No
No
No
NO
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No