Table of Contents
Advertisement
Appendix A. EX 1.0 Feature Update
Off-Hook Monitoring
Description
Operation
Analog Adapter
Description
Programming
Operation
Page A-16
Barge-Ins During Handset Mute. If another phone barges in on your call
while Handset Mute is ON, and you change to conference talk (but not by
pressing HOLD), Handset Mute will remain ON.
FF-Key/One-Touch Key Restriction. Handset Mute cannot be assigned to
an FF-key or a one-touch (soft) key.
Off-Hook Monitoring lets you put a call on speaker while the handset is
off-hook. You can still communicate with the outside party via the handset,
but you will also be able to hear the other party on the phone's speaker. He/
she will only be able to hear what is spoken through your handset, however
- audio will not be transmitted through your microphone.
1.
During a call, press the ON/OFF key.
• Another receiver path is established on the phone's speaker
-- you can now hear the outside party on the speaker as well
as in the handset.
• Your phone's microphone is muted so that the outside party
hears only what is spoken through your handset. (To mute
handset transmission, press MUTE.)
2.
To turn off Off-Hook Monitor ("kill" the speaker but stay on
the line with the outside party through the handset), press ON/
OFF again.
The Analog Adapter (VB-44100) consists of a base adapter and PC board
which is installed on the underside of the phone. It is used to connect the
44-Series large-display phone to an analog device such as an SLT
telephone, cordless phone, FAX machine, or modem. This allows the same
phone line to be used to alternate between normal phone calls and analog
communications. (To install, see the instructions supplied with VB-44100).
See Section 400 - Programming (Appendix C) for more detailed
programming information.
DBS Manual - Revised April 2000
Section 700-Operation
DBS-2.3/9.2-700
Hide quick links:
Advertisement
Table of Contents
