Section 700 - Operation
Call Waiting
(All Versions)
Description
You can send a Call Waiting signal, followed by a brief LED message, to a
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to the
message sender's extension.
The following messages can be sent using the Call Waiting feature:
Table 4-4. Call Waiting Text Messages
Message codes 0-4 are not available.
With CPC-AII and CPC-B Version 4.0 or higher, users can also respond to
call waiting by sending a text message. See "Call Waiting/OHVA Text
Reply" on page 4-32.
Operation
To set Call Waiting:
1. Press the ON/OFF key.
2. Dial the extension number.
DBS-2.3/9.2-700
extension after Transfer Recall Timer expires. The other extension's
number and the number of the transferred CO line or extension then appear
on your display and the call is returned to your extension.
(For example, if you transfer an outside call on line 1 to extension 135 and
that extension is busy or does not answer, the call will return to your
extension and "Recall 135 #01" will appear on the display.)
Message
Code
5
6
7
8
9
The phone issues busy tone.
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
Message
"Visitor Here"
"Need Help"
"Important"
"Urgent"
"Emergency"
4-29