Erasing The Icm; Monitoring Incoming Calls - Panasonic AUTO-LOGIC KX-F3500 Operating Instructions Manual

Operating the Answering Machine (com.)
Erasing the ICM Monitoring incoming Calls
■ To Erase the Recorded Messages:
Wait until the last message has played back and the
tape stops.
1 Push REC and REW simultaneously.
•The messages will be erased while the tape is
rewinding.
NOTE:
The tape can be erased at high speed even if the
record-prevention (knock-out) tabs have been
While an Incoming Message is being recorded, you can
monitor it through the build-in speaker by adjusting the
SPEAKER VOLUME control.
•The following message will be displayed on the display.
ATAS ANSWERING
■ To speak to the caller directly:
1 Lift the handset or push SP-PHONE and speak.