Conference Calls - Panasonic VB-44210G User Manual

Section 700 - Operation
2. Dial the telephone number.
3. Complete the call and replace the handset.
Related Programming
• FF1 (System): SMDR Display Start Timer for CO Calls
• FF5 (FF Keys): FF Key Assignments for Extensions
Considerations
• The duration of a call appears on the display while the call is in progress (if
• In CPC-A and CPC-B Versions prior to 3.1, the SMDR Display Start

Conference Calls

(All Versions)
Description
Conference Calls allow an extension user to add a party to an existing
conversation.
Extension users can create the following types of Conference Calls:
• One outside line and two extensions
• Two outside lines and one extension
• One outside line and three extensions
• Two outside lines and two extensions
DBS-2.3/9.2-700
The dialed number appears on the display.
• The line LED changes from green to red and then goes off.
• The time and date reappears on the display.
enabled in programming).
Timer can be set to start 16 or 30 seconds after the last digit of the
telephone number is dialed.
In CPC-AII and CPC-B Version 3.01 or higher, the timer can be set to start
at 5, 16, or 30 seconds.
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
4-39