Panasonic VB-44210G User Manual page 209

Section 700 - Operation
2. Press the CONF key.
3. Press AUTO.
4. Press a System Speed Dial key.
5. Press the ON/OFF key.
Related Programming
• FF1 (System): Speed Dial Mode Setting (CPC-AII and CPC-B Version 7.0
• FF1 (System): Override Toll Restriction With SSD Numbers
• FF10 (Speed Dialing): System Speed Dialing
Considerations
• If numbers do not appear on the display when you use System Speed Dial
• The system can be programmed to allow System Speed Dial Numbers to
• You can make outside calls using this feature, even if your extension is
• Speed Dial code cannot be checked while Station Lockout is activated.
• With CPC-AII and CPC-B Version 7.0 and higher, if the Speed Dial is
DBS-2.3/9.2-700
"C" appears in the display.
The programmed data appears on the display.
• The ON/OFF LED goes off.
• The date and time appear on the display.
and higher)
codes (00-89 or 000-199), your extension is not programmed to display
that data.
override toll restrictions.
assigned toll restriction type 2-6.
used to forward to an outside number and Least Cost Routing is enabled,
the Speed Dial cannot use Trunk Access "9." Use trunk access 81-86
instead.
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
4-93