Dp/Dtmf Stations; Dp To Dtmf Signal Conversion - Panasonic VB-44210G User Manual

Section 700 - Operation

DP/DTMF Stations

(All Versions)
Description
The DBS allows both dial pulse and DTMF extension types.
Related Programming
• FF2 (Trunk): DTMF/Pulse Dialing for Trunks
Considerations
• DP to DTMF Signal Conversion allows DTMF extensions to use either

DP to DTMF Signal Conversion

(All Versions)
Description
This feature allows an extension user to switch from DP to DTMF signaling
when using a DP trunk.
For instance, if a user dials into a voice mail system using a DP trunk, the user
can switch to DTMF signaling to communicate with the voice mail system.
DTMF tones can be sent either during the call or while the call is being
dialed.
Operation
To switch from dial pulse to DTMF dialing, press "*" or "#."
Related Programming
• FF2 (Trunk): DTMF/Pulse Dialing for Trunks
Considerations
• DTMF dialing remains in effect for the duration of the call. Pulse dialing is
DBS-2.3/9.2-700
dial pulse or DTMF trunks.
restored when the handset is replaced.
DBS Manual - Revised April 2000
Chapter 3. System Features
Page 3-29