Panasonic VB-44210G User Manual page 354

Appendix D. CPC-AII/B 9.1 Feature Update
Notes
Page D-2
To retrieve a records:
Once the call recording is complete, the recording is stored in your
voice mail box as a new voice mail message.
PanaVOICE treats the recording message just as it would any other new
message (lights the message waiting LED, displays MSG on your
telephone, provides off site message notification, etc.).
Retrieve the call recording just as you would any other new voice mail
message. (If you are unclear on how to retrieve messages, contact your
PanaVOICE system administrator.)
• Recording a call requires a conference circuit. If no conference circuit is
available, PanaVOICE cannot record the conversation. Systems
equipped with CPC-AII/SCC-Mode A provides 3 conference circuits
and the CPC-B/SCC-Mode B provides 8 conference circuits.
• Since a conference circuit is used, when the call being recorded is
placed on hold the other party will continue to be recorded and will not
hear music-on-hold.
• The call record feature is not designed to support multiple-party
conversations. Once recording a call, do not attempt to add other parties.
If you need to conference in additional parties, first stop the recording
by pressing the Call Record key and then initiate the conference. If you
are in a multiple party conversation, do not attempt to record the
conversation.
• Calls that are in call record mode cannot be transferred. First, stop the
recording by pressing the Call Record key, then transfer the call.
• Call recording may be stopped and restarted multiple times in a
conversation by pressing the Call Record key. However, every time call
recording is stopped, the recording is saved as a separate message.
• When the system is in the process of establishing a call recording
connection, barge-in cannot be performed. However, once recording
begins, a barge-in is possible but not recommended. If a barge-in does
occur, when the party that barges-in disconnects call recording may be
automatically terminated.
• Extension (intercom) calls cannot be recorded. The other party must be
a trunk call (including network trunk calls).
• A trunk call must be in progress for the call to be recorded. You cannot
initiate a call record before connection is made.
DBS Manual - Revised April 2000
Section 700-Operation
DBS-2.3/9.2-700