Panasonic VB-44210G User Manual page 238

Chapter 5. DSLT Features
2. Pick up the handset.
To answer Call Waiting (without disconnecting the current call):
1. Press HOLD.
2. Press HOLD again to retrieve the first call.
Related Programming
• FF1 (System) Extension Class of Service Setting (CPC-AII and CPC-B
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
• FF3 (Extension): Call Waiting/OHVA
Considerations
• Call Waiting can be used without entering a message code.
• An extension that has DND activated, has a call on hold, is ringing (from
• An extension that has call forwarding activated cannot receive call waiting
5-20
The current call is disconnected.
You are automatically connected to the extension sending the Call
Waiting.
• The current call is disconnected.
• The new call is connected automatically.
Version 3.1 or higher)
CPC-B Version 3.1 or higher)
another call), or is engaged in a conference call cannot receive Call
Waiting messages.
messages unless it has an available ML key.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700