Section 700 - Operation
3. Press CONF when your call is answered.
Considerations
• Press the FLASH key to exit a Conference Call.
• The Hold feature cannot be used during a three-party conference.
Dial "0" for Attendant
(All Versions)
Description
The Attendant can be called from any extension by pressing "0."
If multiple attendants are assigned, dial "0" calls goes to Attendant "1" first.
If attendant "1" is busy, the call then goes to Attendant "2." The call
continues to transfer to the next attendant in the attendant group, if necessary.
A maximum of four attendants can be assigned.
Operation
1. Lift the handset.
2. Press "0."
Related Programming
• FF1 (System): Second Attendant Position
• FF1 (System): Third Attendant Position
• FF1 (System): Fourth Attendant Position
• FF1 (System): Attendant Transfer Extension
DBS-2.3/9.2-700
DBS Manual - Revised April 2000
Chapter 5. DSLT Features
5-23