Panasonic VB-44210G User Manual page 205

Section 700 - Operation
Operation
To assign Personal Speed Dialing:
1. Press ON/OFF.
2. Press PROG.
3. Press a One-Touch key or press AUTO followed by the personal speed
4. If you want to include a trunk access code in the number, press CONF
5. Dial the number.
6. Press HOLD.
7. Press ON/OFF.
To use a programmed Personal Speed Dial key:
1. If the Speed Dial key includes a trunk access code, simply press the key.
2. Complete your call and replace the handset.
To check a programmed Personal Speed Dial key:
1. Press the ON/OFF key:
DBS-2.3/9.2-700
dial bin number (90-99 or 900-909).
then 9 or 1~6. (1-6 = trunk groups 81-86.)
If you enter a trunk access code in the speed dial number, you do not have
to open a trunk before using the number.
If the Speed Dial key does not include an access code, press an unlit line
key before pressing the Speed Dial key.
• The phone issues outside dial tone.
• The line LED lights green.
• "CO TALK #XX" (where "XX" is the line number) appears on the
display.
The line LED changes from green to red and then goes off.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
4-89