Panasonic VB-44210G User Manual page 165

Section 700 - Operation
To assign Call Forwarding--External to an FF key (CPC-AII/CPC-B
prior to 7.0):
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the FF key to be programmed.
4. Enter "72."
5. Press "3."
6. Press the AUTO key.
7. Enter the Speed Dial code (System Speed dial 00-89 or Personal Speed
8. Press the HOLD key.
To assign Call Forwarding--Outside to an FF key (CPC-AII/CPC-B
7.0 and later):
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the FF key to be programmed.
4. Enter "72."
5. Dial the appropriate call forwarding code.
DBS-2.3/9.2-700
"Enter Code" appears on the display.
dial 90-99 or 900-909).
Note: The speed dial code must include the CONF key (to indicate a
trunk call), the appropriate trunk access code, and the outside number.
Intercom Calls will now be forwarded. CO incoming calls and transferred
CO calls will not be forwarded to an outside line.
"Enter Code" appears on the display.
Call Forward Type
All
Busy/no answer
Busy
No answer
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
Code
0
1
2
4
4-49