Line Appearances - Panasonic VB-44210G User Manual

Chapter 4. Key Telephone Features
2. Press the REDIAL key.
3. Complete the call and replace the handset.
Considerations
• If the Auto Flash Redial feature is set, you can flash the outside line once
• The Last Number Redial feature can redial a number up to sixteen digits
• A maximum of five chained Speed Dialing codes can be redialed. See

Line Appearances

(All Versions)
The DBS provides up to four types of line appearances, depending on the
CPC version used.
The following table summarizes how each type of line appearance is used:
Table 4-7. MCO and ML key definitions
Key
DSS/BLF Appear-
ances
Direct Line (DL)
Appearances
Multi-CO (MCO)
Appearances
Multi-Line (ML)
Appearances
4-60
The last number dialed appears on the display.
The line key LED changes from green to red and then goes off.
by pressing the REDIAL key at the busy tone. You can then redial the last
number dialed.
long.
"One-Touch Keys" on page 4-74 for more information.
Definition
DSS/BLF keys provide one-touch dialing, direct station selection
(DSS), and busy lamp fields (BLF) for extensions.
DL keys are used to originate and receive calls over specific trunk
numbers.
MCO keys are used to originate and receive CO calls.
ML keys are used to originate and receive CO line calls and intercom
calls.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700