Multi-Line (Ml) Appearances - Panasonic VB-44210G User Manual

Section 700 - Operation

Multi-Line (ML) Appearances

(CPC-AII and CPC-B Version 2.0 or higher)
Description
You can make and receive both CO line calls and Intercom Calls using a
Multi-Line (ML) key. Each extension can have up to 24Multi-Line keys. The
Attendant can have up to 24 Multi-Line keys.
See "ML/MCO Separation" (page 4-66) for information on assigning both
ML and MCO keys to the same system (CPC-AII and CPC-B Version 4 or
higher).
Operation
Operation
To originate a trunk call
To place a call on Exclusive Hold (page 4-37)
To place a call on System Hold (page 4-18)
To transfer a call
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF2 (Trunks): Pooled Trunk Access for Group "9"
• FF2 (Trunks): Pooled Trunk Access for Group "81-86"
• FF3 (Extension): Forced Least Cost Routing
• FF5 (Keys): FF Key Assignment (all)
• FF8 (LCR) LCR Settings (all)
Considerations
• A Multi-Line key will ring for incoming CO calls, Intercom Calls, recall
DBS-2.3/9.2-700
calls, and call-forward calls.
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
Action
Press an idle ML key.
The key blinks (green) as the call is
made.
Press the ML key.
Press the HOLD key.
Press HOLD, dial the destination exten-
sion, then press PROG.
4-65