Screened Transfer - Panasonic VB-44210G User Manual

Section 700 - Operation
Related Programming
• FF1 (System): Onhook (Automatic) Transfer
• FF1 (System): Recall Timer for Extension-Transferred CO Calls
• FF1 (System): Recall Timer for Extension-Transferred Intercom Calls
Considerations
• In order for users to transfer calls by flashing the switchhook, dialing the
• You cannot transfer a call to an extension that has Do Not Disturb or
• You can transfer a call to an extension that has Call Forwarding activated.
• When you transfer a call to an extension that is busy or does not answer

Screened Transfer

Description
Using the Screened Transfer feature, you can contact a third party via an
extension before transferring a call to that party.
Operation
To use Screened Transfer when your system is set for Onhook
Transfer:
1. Flash the switchhook to place the call on hold.
DBS-2.3/9.2-700
• The third party need only pick up the handset to speak to the outside
line.
extension, and going onhook, the Onhook Transfer feature must be
enabled.
Absence Message activated.
The transferred call will follow the call forwarding path of the extension it
is transferred to.
For example, if extension "A" is covered to extension "B," calls that are
transferred to extension "A" will be forwarded to extension "B."
and does not have Call Forwarding activated, the transfer will recall your
extension after the Transfer Recall Timer expires.
DBS Manual - Revised April 2000
Chapter 6. SLT Features
6-15