Call Hold - Panasonic VB-44210G User Manual

Chapter 6. SLT Features

Call Hold

(All Versions)
Description
Call Hold provides either exclusive or system hold, depending on system
programming. With Exclusive Hold, only the extension that held the call can
retrieve it. With System Hold, another extension can retrieve the call.
Operation
To place a call on Hold:
Flash the switchhook.
To release the call:
Flash the switchhook again.
Related Programming
• FF1 (System): Recall Timer for Extension-Held CO Calls
• FF1 (System): Recall Timer for Extension-Held Intercom Calls
• FF1 (System): SLT Onhook Flash Timer
• FF3 (Extensions): Single Line Telephone Hookflash (Broker's Hold/
• FF1 (System): Single Line Telephone Flash Control
Considerations
• A held call recalls if it is not retrieved before the Hold Recall Timer
• If there is no response to the Hold Recall, the call transfers to the Attendant
• If you flash the switchhook during a conference call, the flash is ignored.
• If your system is set to onhook transfer, and you have placed an outside
6-10
Conference)
expires.
Phone; however, no tone sounds at an Attendant Phone if Night Mode is
activated.
call on hold and then made an intercom call, make sure the other extension
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700