System Hold - Panasonic VB-44210G User Manual

Chapter 4. Key Telephone Features
• FF1 (System): Non-Appearing Central Office Line Hold
Considerations
• When using an outside line for which there is no line key on your
• A held call will recall if it is not retrieved before the Hold Recall Timer
• If you press the HOLD key during a conference with two outside lines,
• If your system is set for onhook transfer and you have placed an outside
• The DBS can provide music-on-hold to callers placed on hold. See

System Hold

Description
Using System Hold, you can place either an outside call or an Intercom Call
on hold.
A call placed on System Hold can be retrieved from any extension.
Operation
To place a call on System Hold:
Press the HOLD key.
• The line LED being used for the call flashes green.
• The phone issues intercom dial tone.
4-18
extension, press the HOLD key to place the call on hold, and then press a
vacant line key. Release the held call by pressing HOLD again. (System
programming determines whether the call will be placed on Exclusive
Trunk Hold or System Trunk Hold.)
expires. "Hold Recall #XX" (where "XX" is the outside line number)
appears on the display if a call has been held beyond the time limit.
both outside lines will be placed on hold.
call on hold, and you then make an Intercom Call, make sure the other
extension hangs up before you do. If you hang up before the other
extension, the held outside line will be transferred to that extension.
(Pressing FLASH releases the extension.)
"Music-On-Hold" (page 3-34) for more information.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700