Panasonic VB-44210G User Manual page 166

Chapter 4. Key Telephone Features
6. Press the AUTO key.
7. Enter the Speed Dial code (System Speed dial 00-89 or Personal Speed
8. Press the HOLD key.
To assign Call Forwarding to a Hunt Group pilot number or an
extension number to an FF key:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the FF key to be programmed.
4. Enter "72."
5. Enter the Call Forwarding code (0, 1, 2, or 4).
6. Enter the Hunt Group pilot number or an extension number.
7. Press the HOLD key.
To erase a code stored in an FF key:
Note: FF keys assigned as CO lines cannot be cleared using the following
procedure. CO line keys can only be cleared through system programming.
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the FF key to be programmed.
4. Press the HOLD key.
4-50
"ENTER FWD EXT#" appears on the display.
dial 90-99 or 900-909).
Note: The speed dial code must include the CONF key (to indicate a
trunk call), the appropriate trunk access code, and the outside number.
Calls will now be forwarded according to the forwarding type selected.
"Enter Code" appears on the display.
"Enter Code" appears on the display.
"Code Cleared" appears.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700