Table of Contents
Advertisement
[519] Off-Hook Call Announcement (OHCA)
Description
Enables or disables to perform the Off-Hook Call Announcement (OHCA) and Whisper
OHCA on a Class of Service (COS) basis.
Selection
• COS number: 1 through 8
• Enable/Disable
Default
All COS — Enable
Programming
1.
Enter 519.
Display: OHCA
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Enable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all COS to one selection, press the
contents programmed for COS 1.
Features Guide References
Off-Hook Call Announcement (OHCA)
Whisper OHCA
Programming Guide
key at step 3. In this case, the display shows the
COS Programming
197
Advertisement
Table of Contents
