Call Park - Panasonic VB-44210G User Manual

Chapter 5. DSLT Features
• If there is no response to the Hold Recall tone, the tone is issued at the
• If your system has onhook transfer activated, and you have placed an
• An error tone is issued if you attempt to hold more than one call at once.
• The DBS can provide Music-on-Hold to callers placed on hold. See

Call Park

(All Versions)
Description
You can use the Call Park function to transfer a call, even if you cannot locate
the intended recipient of the call. Simply park the call and then page the
person to whom you want to transfer the call. That person can answer the call
from any extension by dialing the number of the extension that parked the
call.
Operation
To park a call:
1. Press the HOLD key.
2. Dial "75."
To retrieve a parked call:
1. Lift the handset.
2. Dial "76."
3. Dial the number of the extension that parked the call.
5-12
Attendant Phone. However, no tone is issued at the Attendant Phone if
Night Mode is activated.
outside call on hold and then made an Intercom Call, make sure the other
extension presses the FLASH key or hangs up before you do. If you hang
up before the other extension, the held outside line will be transferred to
that extension.
"Music-On-Hold" (page 3-34) for more information.
The phone issues intercom dial tone.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700