Panasonic VB-44210G User Manual page 189

Section 700 - Operation
4. Make your announcement.
To answer an OHVA:
1. Press the Talk Back key (*3 must be programmed in an FF key).
2. To return to the previous call, press the Talk Back key again.
To transfer a call using OHVA
1. Press the HOLD key to place the call to be transferred on hold.
2. Dial the number of the extension to which the call will be transferred.
3. Press "5" and announce the call to be transferred.
To answer a call after it has been announced using OHVA:
1. Replace the handset.
2. Pick up the handset.
Related Programming
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
• FF3 (Extension): Call Waiting/OHVA
DBS-2.3/9.2-700
• The Talk Back key flashes red.
The Talk Back key flashes red.
If the extension is already engaged in a call, your phone issues busy tone.
If the transferred call is not accepted by the called extension, press the
FLASH key to cancel the transfer.
If the transferred call is accepted, and Onhook Transfer is enabled for
your extension, hang up. If OnHook Transfer is not enabled, press PROG
and then hang up.
Note: Attendant console phones transfer by pressing the RELEASE key.
Your extension rings.
3.1 or higher)
CPC-B 3.1 or higher)
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
4-73