Isdn Programming Flexibility - Panasonic VB-44210G User Manual

Appendix I. CPC-EX 2.3 Feature Update
6. When Password> is displayed, type the 4-digit remote or private
7. After the DBS responds with REMT>, type P and then press Enter.
8. Follow the directions on the screen to access the desired program. (See

ISDN Programming Flexibility

Description
The previous versions did not allow the programming flexibility to
accommodate certain central office ISDN configurations. This enhancement
allows the flexibility in programming to set the DBS parameters to match
certain central office provisioning.
Programming
Programming
Operation
N/A
Notes
UNLESS STATED ALL OTHER DEFAULT VALUES ARE CORRECT.
Typical Central Office Configurations
Lucent (AT&T) 4ESS
• CO Type (0) 4ESS
• NSF- None (0) or MegaCom (2) - Depends on service requested from CO.
• ISDN International Code Deduct 0 1 1
• ISDN Long Distance 1 Code Deduction
• Set to (1) to deduct 1 from the CO Setup message.
Page I-16
password.
"Terminal Programming Commands".)
See Section 400 - Programming (Appendix K) for more detailed
programming information.
- Set to (1) to deduct 0 1 1 from the CO Setup message.
DBS Manual - Revised April 2000
Section 700-Operation
DBS-2.3/9.2-700