Intercom Calling - Panasonic VB-44210G User Manual

Section 700 - Operation

Intercom Calling

(All Versions)
Descriptions
The DBS provides two methods of intercom calling: voice calling and tone
calling.
Voice Calling. With voice calling, intercom calls are connected
immediately, without a ringing tone.
Tone Calling. With tone calls, a ringing tone is sent to the called extension.
System programming determines whether the DBS uses voice or tone calling
as a default. If voice calling is the default, dialing a "1" after the extension
number changes the call to a tone call. If tone calling is the default, dialing a
"1" results in a voice call.
Operation
To make a Voice Call:
1. Lift the handset.
2. Dial the extension number.
3. If the system default is tone calling, dial a "1."
To make an Tone Call:
1. Lift the handset.
2. Dial the extension number.
3. If the system default is voice calling, dial a "1."
Related Programming
• FF1 (System): Extension Intercom Calling
• FF1 (System): Alert Tone for Voice Calls
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
DBS-2.3/9.2-700
The called extension will ring.
Version 4.0 or higher)
DBS Manual - Revised April 2000
Chapter 6. SLT Features
6-25