Call Transfer; Blind Transfer - Panasonic VB-44210G User Manual

Chapter 6. SLT Features
Considerations
• If more than one call is arriving at the Paging Group, the Group Call
• If the called extension belongs to more than one Paging Group, the Group
• You can answer incoming calls, Intercom Tone Calling, or Intercom Voice
• Group Call Pickup cannot be used to pick up a ringing phone in Paging

Call Transfer

(All Versions)
The DBS provides two call transfer methods: blind transfer and screened
transfer.
With CPC-A and CPC-B Versions prior to 2.0, SLTs can only transfer trunk
calls. Beginning with CPC-B Version 2.0, SLTs can transfer trunk and
intercom calls.

Blind Transfer

Description
Blind transfer allows the transfer of a call directly to an extension, without
waiting for the called extension to answer.
Operation
1. Flash the switchhook to place the call on hold.
2. Dial the number of the extension to which the call is to be transferred.
3. Replace the handset before the other party answers.
6-14
Pickup feature will answer the call to the lowest port number first.
Call Pickup Feature will answer the call to the lowest-numbered Paging
Group first.
Calling using the Group Call Pickup feature.
Group 00. For example, if an extension is a member of Paging Groups 00
and 06, the extension can use Group Call Pickup to answer ringing calls in
Group 06, but not in Group 00.
• You can also replace the handset after the third party answers.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700