Panasonic VB-44210G User Manual page 147

Section 700 - Operation
3. Press the Talk Back key again to return to the original call.
Related Programming
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
• FF3 (Extension): Call Waiting/OHVA
• FF5 (FF Key Settings): FF Key Assignments for Extensions
Considerations
• Message code 8 cannot be used from an SLT. (The digit "8" is used to
• Call Waiting can be used without the user entering a message code.
• Call Waiting is cancelled when the sender replaces the handset.
• If the called extension has DND activated, has a call on hold, is ringing
• A call on an outside line can be placed on hold before Call Waiting is
• If Onhook Call Transfer has been enabled and you have placed an outside
• Call Waiting cannot be sent to an ML key.
DBS-2.3/9.2-700
• The LED of the Talk Back key flashes green.
• The current call is held automatically.
The LED of the Talk Back key goes off when the Call Waiting party
hangs up.
Version 3.1 or higher)
CPC-B Version 3.1 or higher)
transfer calls on SLTs.)
(from another call), or is engaged in a conference call, Call Waiting cannot
be sent.
answered to avoid terminating the original call. An Intercom Call,
however, must be terminated before Call Waiting can be answered.
line on hold to answer Call Waiting, replace the handset after the other
extension hangs up. If the caller hangs up first, the held call will be
transferred to the called extension.
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
4-31