Panasonic VB-44210G User Manual page 144

Chapter 4. Key Telephone Features
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
4. Press the PROG key.
5. Hang up to complete the transfer.
Related Programming
• FF1 (System): Onhook (Automatic) Transfer
• FF1 (System): Recall Timer for Extension-Transferred CO Calls
• FF1 (System): Recall Timer for Extension-Transferred Intercom Calls
• FF1 (System): Recall Timer for Attendant-Transferred CO Calls
• FF1 (System): Recall Timer for Attendant-Transferred Intercom Calls
Considerations
• The Attendant can transfer calls while the handset is still in place, even if
• You cannot transfer a call to an extension that has Do Not Disturb or
• You can transfer a call to an extension that has Call Forwarding activated.
• When you transfer a call to an extension that is busy or does not answer
4-28
• The EXT LED stops flashing and remains lit.
• "Talk-EXT XXX" (where "XXX" is the extension) appears on the
display.
• The line LED for the original outside line turns red.
• "TRF XXX TRK #YY" (where "XXX" is the extension and "YY" is
the line) appears on the display.
• The third party need only pick up the handset to speak to the outside
line.
the system is not set for Onhook Transfer.
Absence Message activated.
The transferred call will follow the call forwarding path of the extension it
is transferred to.
For example, if phone "A" is covered to phone "B," calls that are
transferred to phone "A" will be forwarded to phone "B."
and does not have Call Forwarding activated, a call tone is issued at your
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700