Station Lockout Code Assignment - Panasonic VB-44210G User Manual

Section 700 - Operation

Station Lockout Code Assignment

(All Versions)
Description
The Station Lockout feature allows users to dial a Station Lockout code to
restrict their phone from being used for outside calls.
Station Lockout codes can be assigned through the attendant phone.
Operation
To program a Station Lockout code:
1. Press the ON/OFF key.
2. Press the CONF key.
3. Dial "#8."
4. Dial the extension number.
5. Enter the desired key code (four digits).
6. Press the HOLD key.
7. Press the ON/OFF key.
Considerations
• A locked extension can be used for Intercom Calls.
• Station Lockout key codes can also be set through system programming.
DBS-2.3/9.2-700
the personal VM key is not assigned to the lowest-numbered key, it will not
flash to indicate VM messages.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
"STORE XXXX" (where "XXXX" is the key code) appears on the
display.
The ON/OFF LED goes off.
DBS Manual - Revised April 2000
Chapter 2. Attendant Features
2-21