Panasonic VB-44210G User Manual page 157

Section 700 - Operation
To establish an Unsupervised Conference Call:
1. Press HOLD or the line key of your current call to place it on hold.
2. Press an unlit line key .
3. Dial the number of the party you wish to add to the call.
4. Press the CONF key when your call is answered.
5. To drop out of the conference and establish the Unsupervised Conference
6. To return to the call, press one of the conference line keys.
• The SCC-A card provides 3 four-party conference circuits. The SCC-B
• Press FLASH or hang up to exit a Conference Call.
• The Call Hold feature cannot be used during a four-party Conference Call.
Related Programming
• FF1 (System): Unsupervised Conference Timer
• FF2 (Trunk): Unsupervised CO Conference
• FF3 (Extension): Unsupervised Conference
DBS-2.3/9.2-700
The outside line number or name of the party on hold appears on the
display.
• The line LED lights green.
• The phone issues outside dial tone.
• "CO TALK #XX" (where "XX" is the line number) appears on the
display.
The number appears on the display.
"CONF #XX #YY" (where "XX" is the first line and "YY" is the second
line) appears on the display.
Call, press HOLD.
provides 8 four-party conference circuits
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
4-41