Vau Port Assignment - Panasonic VB-44210G User Manual

Section 700 - Operation
2. After the VAU answers, do one of the following:
3. When the operation is complete, put the phone on hook.
Considerations
• For more information on the VAU and its operation, see Section 770,

VAU Port Assignment

(CPC-AII and CPC-B Version 5.0 or higher, CPC-A Version 3.3 and higher)
Operation
A digital port can now be assigned as a VAU through system programming.
In previous releases, VAUs were assigned as standard digital ports. Using the
standard digital port assignment required the installer to make the following
program changes:
DBS-2.3/9.2-700
If . . .
You want to record the
first message
You want to record the
second message
You want to play the first
message
You want to play the
second message
Notes:
• You can enter the *97 codes again to replay messages without ending
your call.
• You can only record one message at a time. To record another message,
you must end your call and redial the VAU.
"Voice Announce Unit User Guide."
•The CO Offhook Signal option had to be set to "off" (FF3 1-144# 7#).
DBS Manual - Revised April 2000
Chapter 3. System Features
Then . . .
Dial * 98 1
Wait for a beep. After the beep, record the
message.
Dial * 98 2
Wait for a beep. After the beep, record the
message.
Dial * 97 1
The VAU plays the message.
Dial * 97 2
The VAU plays the message.
Page 3-67