Panasonic VB-44210G User Manual page 86

Chapter 3. System Features
from an extension, give instructions to an entire group, or communicate with
several people at once. If an external paging system is connected to your
system, pages can also be sent through its speakers.
Beginning with CPC-B Version 3.1, the Paging feature can also be
programmed to time out after sixty seconds. When a page call times out, a
busy tone is sent to the extension that initiated the page.
Operation
To use the Paging feature:
1. Pick up the handset.
2. Press "#," then enter the number of the desired Paging Group (00-07).
3. Make your announcement.
4. Replace the handset.
Related Programming
• FF1 (System): Page Duration (CPC AII and CPC-B Version 3.1 or higher)
• FF1 (System): External Page Interface Control for Paging Groups
• FF3 (Extension): Extension Page Group
Hardware Requirements
• External relays and an amplifier are required for external paging.
Considerations
• If an external paging system has been connected to Paging Groups 00-07,
• An extension can belong to more than one paging group.
• A maximum of eight Paging Groups can be assigned to a system.
• Only one page may be performed at a time with one exception. Pages to
Page 3-40
The EXT LED lights.
pages can be made through the external speakers. Voice Paging can also be
heard over the extensions in groups 00-07.
group 00 always take priority. If you page group 00 while another
extension is paging group 01-07, the other page terminates. The other
pager receives busy and "Page Overridden" displays on the telephone.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700