Setting Modified For Smdr - Panasonic VB-44210G User Manual

Section 700-Operation
Figure A-13.SMDR Format for CPC-EX
0 1
012345678901234567890123456789012345678901234567890123456789012345678901234567
1 2 3
T MM/DD HH:MM:SS HH:MM.SS NNN DDDDDDDDDDDDDDDDDDDDDDDDDDDD AAAAAAAAAA VVVVV NN
1=Call type
S=Inbound DISA
s=Outbound DISA
I=Incoming
O=Outgoing
T=Transfer (See Note 1)
N=DNIS
D=DID
W=CO outgoing to Network
w=CO incoming from network
t=Network Transfer
r=ISDN incoming call
R=ISDN outgoing call
2=Date
MM=month
DD=day
3=Call start time
HH=hours
MM=minutes
SS=seconds
4=Call duration
HH=hours
MM=minutes
SS=seconds
Notes:
1. Transferred calls include direct and group call pickups and conference calls.
If a station call is transferred to an outside number, an SMDR record is
also created for the station that is transferred.
2. The * symbol appears as a greater-than sign (>) on the SMDR printout; the # symbol
appears as a less-than sign (<). Centrex and PBX codes, as well as LCR access codes, do
not appear as dialed digits. If the Caller ID Feature is installed and enabled,
"Private" appears with calls that have restricted Caller ID display and "Out of Area"
with long distance calls that do not provide Caller ID information.

Setting Modified for SMDR

Values have been redefined for the SMDR Start Timer. The following table shows the
enhanced values.
Note: These values apply to CPC-EX only.
Programming
DBS-2.3/9.2-700
2 3
4 5
See Section 400 - Programming (Appendix C) for more detailed
programming information.
DBS Manual - Revised April 2000
Appendix A. EX 1.0 Feature Update
4 5
6
5=Extension number (or network trunk)
10-69, 100-699=extensions
CO number=DISA
n01-n04=virtual port 1 to 4
#01-#64=network trunk number
6=Dialed digits, Caller ID or ANI
DD=digits 0-9 or symbols * or #
(See Note 2)
7=Account code
A=0-9999999999
8=Verified account code or walking
COS code
V0000-V9999=verified account codes
W0000-W9999=walking COS codes
9=Trunk Number
NN=number (01-64)
6 7
7 8 9
Page A-33