Auto Redial; Busy Override - Panasonic VB-44210G User Manual

Chapter 5. DSLT Features
- Direct trunk calls (including DID/DNIS)
- Transferred trunk calls.

Auto Redial

(CPC-AII and CPC-B Version 7.0 or higher)
Description
If the Redial key is pressed when the extension is idle or receiving dial tone,
the last intercom or outside number is automatically redialed.
Related Programming
• FF3 (System): Auto-Redial on Extensions
• FF1 (System): Extension Class of Service Setting
• FF3 (Extension): Extension Class of Service Assignment

Busy Override

(All Versions)
Description
Extensions in the same Paging Group (1-7) can break into one another's
outside or intercom calls to relay information or to create three-party
Conference Calls.
Operation
1. Pick up the handset.
5-6
Forwarding. In versions prior to 5.0, incoming trunk calls to extensions are
routed according to the ringing assignment for the trunk.
The following types of incoming trunk calls follow Permanent Call
Forward settings:
The phone issues intercom dial tone.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700