Night Service - Panasonic VB-44210G User Manual

Section 700 - Operation

Night Service

(CPC-AII prior to Version 7.0 and CPC-B Prior to Version 7.0)
Description
The Attendant can switch the system between Day and Night Modes for
answering outside calls. It is also possible to program the system to
automatically switch between night and day modes. (CPC-AII or CPC-B
Version 4.0 or higher is required for automatic day mode settings.)
While in Night Mode (generally used at night or any time when your office is
closed), incoming calls can ring at selected extensions (a night watchman's
extension, for example), an extension connected to an answering machine, or
to a Universal Night Answer point. Universal Night Answer (UNA) is used to
allow calls to be picked up from any extension.
See page 3-64 for information on setting a UNA point.
See "Auto Day Mode" (page 3-6) for information on a CPC-B Version 4.0
enhancement (also available in CPC-AII) that allows automatic switching
between day and night modes.
Operation
To switch to Night Mode:
1. Press the ON/OFF key.
2. Dial "#52."
3. Press the ON/OFF key.
To switch to Day Mode:
1. Press the ON/OFF key.
DBS-2.3/9.2-700
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
• The ON/OFF LED goes off.
• "NIGHT MODE" appears on the display.
• The phone issues intercom dial tone.
DBS Manual - Revised April 2000
Chapter 3. System Features
Page 3-35