Section 700-Operation
Programming
SMDR Printing Mode 1: Outbound and Inbound
Description
Programming
T1 Trunk Type
Description
Programming
Extension Numbers
Description
Forced LCR/NRS
Description
Programming
Other Changes to Programming Addresses
Flexible Function Screen Soft-Key Assignments (FF1 2# 7# 25-39# (1-10)# (xxxxxxxx)#)
and FF Key Assignments have been modified to allow up to 8-digit entries.
DBS-2.3/9.2-700
See Section 400 - Programming (Appendix C) for more detailed
programming information.
SMDR data sent to Serial Port 1 can now include Network Calls also.
See Section 400 - Programming (Appendix C) for more detailed
programming information.
The setting for T1 Trunk Type now includes a parameter for E&M
Network.
See Section 400 - Programming (Appendix C) for more detailed
programming information.
The address for extension number assignments has been modified to allow
for 4-digit extensions.
The address for Forced Least Cost Routing has been modified to include
Network Node Route Selection (NRS).
See Section 400 - Programming (Appendix C) for more detailed
programming information.
DBS Manual - Revised April 2000
Appendix A. EX 1.0 Feature Update
Page A-29