Call Pickup - Panasonic VB-44210G User Manual

Chapter 4. Key Telephone Features
3. Enter the Park Number assigned to the call.
Related Programming
• FF1 (System): Attendant Park Hold Recall Timer
• FF1 (System): Extension Park Hold Recall Timer
Considerations
• An alarm tone is issued if a parked call is not released before the Recall
• You cannot park more than one outside line at a time.
• The Attendant Phone cannot use this feature. The Attendant must use the
• The Call Park Recall Timer is similar to the Recall Timer, except that
• You can store "75" on an FF key and use it as a Call Park key. After

Call Pickup

(All Versions)
The DBS provides both directed and group call pickup.
Direct Call Pickup
Description
A call to any extension can be answered from another extension using the
Direct Call Pickup feature. The Direct Call Pickup feature can be
programmed into a One-Touch key.
4-22
"PARK PICK XX" (where "XX" is the park number) appears, and then
"CO TALK #XX" (where "XX" is the trunk number of the call) appears.
Timer expires (determined by system programming). If this happens, the
user that parked the call can retrieve it by simply picking up the handset. If
no one retrieves the call after the Recall Timer expires, a second alarm will
sound at an attendant phone(s).
Attendant Call Park feature.
when the Call Park Recall Timer is set for "0" a call is recalled
automatically in three minutes.
placing an outside call on hold, press the Call Park key to park the call. The
Call Park LED will light while the call is parked and then go off when the
call is released.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700