Main Charger Cleaning - Microplex SOLID 60E-2 Operator's Manual

Table of Contents

Operator Maintenance

_______________________________________________________________________________________________

7.1.1. Main Charger Cleaning

________________________________________________________________________________________________

MICROPLEX

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es

Turn off the printer and pull the power plug before start working

at the chargers.

1. Open the front cover of the printer.

Handhold

2. Turn the knob screw of the main charger (C1) to loosen it.

Then pull the charger towards you.

Knob screw

Main charger (C1)

3. Place the charger on a clean and level worktop.

Operator's Manual SOLID 60E-2

Front

cover

Edition 2.1

Table of Contents

Do you have a question about the SOLID 60E-2 and is the answer not in the manual?

Kp3828