Configuration Via The Control Panel - Microplex SOLID 60E-2 Operator's Manual

40 Operation and Menu Structure
_______________________________________________________________________________________________

4.5. Configuration via the Control Panel

________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
You can use the control panel to change the printer configuration
and customize your printer to meet your specific needs.
In addition printer configuration via Ethernet is possible.
The MICROPLEX printer controller offers an integrated website, for
more information see Networking Features of MICROPLEX
Chapter 5 (Panel Functions) describes how to reach the particular
printer functions via the control panel.
T e m p o r a r y changes in printer configuration are effective only
as long as the printer stays turned on. To select such changes
temporarily, the user must terminate the change of function by
pressing the SAVE key one single time.
P e r m a n e n t changes in printer configuration are active each
time the printer is turned on again. To select such changes
permanently, the user must terminate the change of function by
pressing the SAVE key two times.
An output of the current printer values can be generated using the
"Status Sheet Printing" panel function (see section 5.1).
Please note:
 User default settings remain in effect until you save new settings
or restore the factory defaults.
 Settings you choose from your software application or printer
driver can also change or override the user default settings you
select from the touch panel.
Operator's Manual SOLID 60E-2
Printers.
Edition 2.1