Microplex SOLID 60E-2 Operator's Manual page 130

Table of Contents

Advertisement

130
Operator Maintenance
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
24. Make sure paper is set correctly (see section 3.1, too).
25. Turn the printer on.
During the following warm up time the printer's panel display shows
the message "WARM UP".
After a certain time an error message is displayed.
26. Now please open the printer's front cover.
27. Turn the green lock lever of the cleaning unit to the "lock"
position (vertically to 12-o'clock direction).
28. Close the printer's front cover.
29. Press the "ON LINE" key on the printer's control panel to clear
the error message.
Now the process of OPC drum initialization is working for a while.
After that the printer will switch to the "READY" status.
Disposal of the old OPC drum will be carried out by your service
engineer. Until disposal please keep the photoreceptor drum in its
original packing.
Operator's Manual SOLID 60E-2
Edition 2.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOLID 60E-2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Kp3828

Table of Contents