Table of Contents
Advertisement
108
Operator Maintenance
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
4. Pull out the developer unit partially using the lever.
5. Reach for the handle with your other hand, remove the unit
from the printer and place it on a covered, level worktop.
6. For developer unit cleaning make a potential compensation
(grounding) with the printer cabinet. At the developer unit the
grounding has to be connected to the back screw of the cover
(see picture below).
Operator's Manual SOLID 60E-2
Handle
Edition 2.1
Advertisement
Table of Contents
Need help?
Do you have a question about the SOLID 60E-2 and is the answer not in the manual?