Print Density Setting - Microplex SOLID 60E-2 Operator's Manual

_______________________________________________________________________________________________

5.27. Print Density Setting

ON LINE
SAVE
SAVE
SAVE
SAVE
MENU
ON LINE
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Using this function the density of the printed characters can be
changed.
Panel display
[SOLID 60E-2 ]
[Menu Level 1 ]
  
[Engine ]
[Resolution ]
  
[Print Density ]
[Print Density 96 ]
  
[Print Density 104 ]
[Save as Setup? ]
Operator's Manual SOLID 60E-2
Panel Functions
Notes
Turn the printer OFF LINE with this
key.
Press one of the ARROW keys until
[Engine ] is displayed.
Press one of the ARROW keys until
[Print Density ] is displayed.
96 = currently set value. (Default
value = 88).
Press one of the ARROW keys to
change the density.
Values from 0 up to 152 are settable.
The print density is increased, the
print image gets darker.
Now the new value is saved.
In addition this new value can be
saved as setup value (using the SAVE
key), before the printer is turned ON
LINE again.
83
Edition 2.1