_______________________________________________________________________________________________
7.1.2. Pre-Charger Cleaning
________________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Turn off the printer and pull the power plug before start working at
the chargers.
1. Open the front cover of the printer.
2. Press down the open lever to open the waste toner recovery unit.
3. Turn to loosen the green knob screw at the pre-charger (C2)
and pull the charger out towards you.
Pre-charger (C2)
Green
knob screw
Operator's Manual SOLID 60E-2
Operator Maintenance
Waste toner
recovery unit
Open lever (black)
101
Edition 2.1
Need help?
Do you have a question about the SOLID 60E-2 and is the answer not in the manual?